A black hard EVA shell with a soft lining, a hook-and-loop divider and a mesh pocket in the lid, sized for Magcubic's HY300 Pro and Pro+ and the many Pros built on the same cylinder.
The FBLFOBELI case treats the HY300 Pro as something fragile, which it is: a small glass lens on a swivel yoke. A hard EVA shell takes the knocks, a soft lining protects the finish, and a divider keeps the adapter from rattling against the lens. At 8.5 × 5.5 × 5.1 inches outside, it is a compact box rather than a bag.
Here is what each part of the case does:
The numbers make sense for the body it is built around. Magcubic gives its HY300 Pro+ as 3.7 × 3.7 × 6.7 inches, and ClokoWe its Pro+ as 3.73 × 3.73 × 6.17 inches. Laid on its side, either cylinder uses most of the length and leaves an end bay for the adapter behind the divider.
| Spec | Value |
|---|---|
| Brand | FBLFOBELI |
| Model | F545 |
| Type | Hard carrying case |
| Outer size | 8.5 × 5.5 × 5.1 in (about 21.6 × 14 × 13 cm) |
| Shell | Hard EVA (ethylene vinyl acetate) |
| Impact protection | Shockproof shell against bumps and drops |
| Weather | Water-resistant exterior against rain and splashes |
| Lining | Soft, against scratches |
| Divider | Detachable hook-and-loop divider |
| Lid | Mesh pocket for cables and small accessories |
| Closure | 360° double zippers |
| Colour | Black |
| Made for | Magcubic HY300 Pro, HY300 Pro+, ClokoWe |
| Also named | Alwtniet, ENUOSUMA, WiMiUS, MoGo 3 Pro, XuanPad, Limimart, Aubor, HIPPUS |
| In the box | Case only; projector and accessories not included |
| Units | 1 |
A film night away from home fails on small things: the adapter left on the kitchen counter, a remote with flat batteries, no HDMI cable for a friend's laptop. One case that holds the whole kit solves most of that. The FBLFOBELI box is small enough to slip into a backpack beside the snacks.
Pack in this order and the lens rides safely:
Think about what the case will not hold. A floor tripod, a pull-down screen or a Bluetooth speaker all travel separately, so plan one more bag if the evening needs them.
The shell earns its keep in three situations:
For a garden screening, add a white sheet and pick a spot two metres from it. The HY300 screen size guide turns that distance into inches.
Back home, the same case doubles as the projector's shelf spot. Zipped shut between film nights, the lens stays free of dust, and the kit is ready to grab.
The FBLFOBELI case names Magcubic's HY300 Pro and Pro+, ClokoWe and a long list of HY300-style projectors from other makers. What they share is the barrel body on a swivel stand, a little under 4 inches across. If your projector looks like that, it is very likely at home here.
The named projectors fall into three groups:
A few HY300 shapes need a second look. Magcubic's HY300F football edition is a 6.5 × 5.5 × 6.8-inch sphere, taller than the 5.1-inch shell, so it wants a roomier case. Models with an attached speaker base or an unusual stand should be measured with the base in place.
The case does not replace the projector's own habits. Let the HY300 cool for a few minutes after a film before zipping it in, since EVA holds heat and the fan stops the moment the power goes. Keep the remote's batteries out if the kit will sit unused for months. Both small habits protect the projector more than any shell can.
Travel-sized models that suit this box are compared in the HY300 vs HY300 Pro guide.
Every HY300 case protects the projector; they differ in shape, pockets and how they carry. The FBLFOBELI shell stands out for its double zips and mesh lid in a compact box. Other cases trade that for more room, a handle or a round shape.
| Case | Shape and size | Inside | Carries by |
|---|---|---|---|
| FBLFOBELI | Hard EVA box, 8.5 × 5.5 × 5.1 in outside | Divider, mesh lid pocket | In a bag or backpack |
| Grapsa | Hard shell, 9.7 × 5.7 × 3.5 in inside | Divider, zipped mesh pocket | Top handle |
| Tangxi | EVA case with velvet lining | Two compartments | Zip closure |
| Aurzen | Cylinder, 11.22 × 5.24 in | Upper bay, side pocket, 8 mm foam | Buckle handle that clips to a backpack |
| MOPFOL | EVA, 24 × 12.5 × 11.5 cm inside | Velvet, separate compartments | Zip closure |
Where the FBLFOBELI box pulls ahead is order. The lid pocket and divider mean you open it and see every part at once, which matters in a dim tent or a hotel room at eleven at night. The trade-off is the lack of a handle, so it lives inside another bag.
Choose by the trip you take most often:
Check these points before ordering:
More cases, stands and spare parts are grouped in the HY300 accessories guide.
Yes, the Magcubic HY300 Pro and Pro+ are the models the case names first. Pro+ versions with a large base are worth measuring against the 5.1-inch shell height.
The exterior is water resistant: it shrugs off rain and splashes. Dunking it in water is another matter.
The movable divider creates a bay for the charger, and the mesh lid pocket holds cables. A compact adapter fits best.
8.5 × 5.5 × 5.1 inches on the outside, roughly 21.6 × 14 × 13 cm. It comes without a projector or accessories.