Tangxi's black EVA case opens like a book: the HY300 rests in velvet on one side, the adapter and remote wait on the other, and a zip closes both against bumps, splashes and dust.
The Tangxi case is built like a clamshell. One half cradles the projector in a premium velvet lining over soft padding; the other half takes the accessories. Close the zip and each part stays in its own space, so the adapter plug never presses against the lens on the way to a friend's flat.
The case keeps its promise simple. It has no removable dividers or stack of pockets, just two compartments that match how an HY300 kit breaks down:
Velvet is the detail that sets it apart from plain foam interiors. It holds the projector gently and does not leave grit on the finish, which matters for a white HY300 that shows every mark. The black exterior, on the other hand, hides the scuffs a travel case always collects.
The case comes on its own, with no projector or accessories inside, and Tangxi covers it with a 90-day manufacturer warranty.
| Spec | Value |
|---|---|
| Brand | Tangxi |
| Model number | Tangxiuzq7p69581 |
| Type | Projector carrying case |
| Material | EVA (ethylene vinyl acetate) |
| Shell | Moulded EVA; sold as a hard case, classed as a soft shell |
| Interior | Premium velvet over soft padding |
| Compartments | 2: projector side and accessory side |
| Closure | Zip |
| Water resistance | Water resistant against splashes |
| Protection | Shockproof; keeps dust off in storage |
| Colour | Black |
| Style | Modern, solid pattern |
| Made for | HY300, HY300 Pro, HY320 |
| Also fits | Capsule 3 |
| Size | Shaped to specific projectors; no outer size published |
| In the box | Case only; projector and accessories not included |
| Warranty | 90-day manufacturer warranty |
Most projectors spend far more hours waiting than playing. An HY300 left on a bookshelf collects dust on the lens and inside the vents, and that dust turns into a hazy picture months later. The Tangxi case is as useful in the living room as it is on the road.
A simple routine keeps a projector ready for the next film:
The accessory side works as a small organiser. Keep these together and film night starts faster:
A projector that lives in a case also survives the household better. Toddlers, cats and vacuum cleaners all take an interest in a small white cylinder at floor level, and a zipped case removes the temptation.
Keep the case somewhere you can reach from the sofa. A projector that takes ten seconds to unpack gets used on an ordinary Tuesday, not only on special occasions.
If the picture looks soft even after cleaning, the fix is usually focus rather than dust. The HY300 fixes guide works through blurry pictures step by step.
Four projectors appear on Tangxi's fit list: HY300, HY300 Pro, HY320 and Capsule 3. All are compact cylinders, which is why one case covers them. What it does not publish is an inner size, so a quick comparison before ordering saves a return.
How the named models relate to one another:
Other shapes are a poor match. The football-style HY300F is a ball about 6.5 inches across, far rounder than a cylinder, and it needs a larger box. Pro+ models on a separate speaker base should be measured with the base attached.
A case that fits too loosely is almost as bad as one that fits too tightly. If the projector slides about, fold a microfibre cloth into the gap so the lens cannot knock the wall of the case. A tight squeeze, meanwhile, strains the zip every time it closes and shortens its life.
Model differences between the HY300 generations are laid out in the HY300 vs HY300 Pro comparison, and the HY300 vs HY320 guide covers the next Magcubic model.
Tangxi and MOPFOL build the closest pair among HY300 cases: both EVA, both velvet inside, both split into compartments. The difference is in what each states. MOPFOL publishes an inner size; Tangxi leans on its list of named projectors.
| Case | Build | Inside | Size stated |
|---|---|---|---|
| Tangxi | EVA, water resistant | Velvet, two compartments | No |
| MOPFOL | Dense EVA, water proof | Velvet, separate compartments | 24 × 12.5 × 11.5 cm inside |
| FBLFOBELI | Hard EVA shell | Soft lining, movable divider, mesh lid | 8.5 × 5.5 × 5.1 in outside |
| Grapsa | Hard shell | Divider, zipped mesh pocket | 9.7 × 5.7 × 3.5 in inside |
| Aurzen | PU leather over 8 mm foam | Lower and upper bays, side pocket | 11.22 × 5.24 in |
If you want certainty on size, MOPFOL's published inside dimensions make the maths easy. If you care most about a soft interior and a simple layout, Tangxi does the job with less fuss. FBLFOBELI suits people who like a divider they can move.
Grapsa and Aurzen answer a different need. Grapsa's top handle suits carrying the projector across town by hand, and Aurzen's round bag clips to a backpack strap for a walk to the park. Neither has velvet inside, which is where the Tangxi case keeps its charm for owners who mostly store the projector at home.
Tick these off before choosing:
Every HY300 case, stand and bracket is grouped in the HY300 accessories guide.
Tangxi names the HY300, HY300 Pro, HY320 and Capsule 3. Measure models with a large speaker base or the round HY300F before relying on the fit.
It is moulded EVA: sold as a hard case and classed as a soft shell. It holds its shape and absorbs bumps but flexes more than rigid plastic.
Yes. One compartment holds the projector in velvet, the other holds the adapter, remote and small cables.
Tangxi gives a 90-day manufacturer warranty. The case arrives alone, with no projector or accessories.