The HY300's built-in swivel stand gets a picture on the wall from a table. A tripod, a ceiling mount, a case and a spare adapter take it everywhere else: above the sofa, over the bed and out to the campsite.
Brought up to date September 2026Add accessories in this order, biggest change to movie night first. Check the model on the box before ordering a remote or an adapter; they are not universal.
Magcubic's 47-inch tripod adjusts from 19 to 47 inches, takes up to 11 lb on a standard 1/4-inch screw and folds to 21.7 inches for a backpack. Magcubic sells its Pro+, Pro, original HY300 and Ultra in bundles with this exact tripod.
Start the showOn a coffee table, an HY300 throws its picture low, and every head on the sofa lands in it. A floor tripod puts the lens above the audience and lets the picture start higher on the wall.
Five stands cover most rooms:
The Magcubic tripod has one advantage: Magcubic ships it with its own Pro+, Pro, original HY300 and Ultra as bundles, so fit on those models is settled. For other brands, check that the projector has a standard 1/4-inch thread underneath. Salange's Ultra states one.
An HY300 projector tripod also helps keystone. With the lens at the height of the picture's lower edge, the projector points nearly straight at the wall and corrects less. The screen size chart shows how far back the tripod should stand.
Tellegloww's white bracket fits the HY300 and HY300 Pro, screws into the wall or ceiling and holds up to 1,200 g. Anchors for concrete and brick and steel nails for wood come in the box.
Start the show
An HY300 projector ceiling mount turns the little box into a fixed bedroom cinema: always pointed, always focused, off the nightstand. The choice comes down to screws or tape, and to the size of your projector's base.
The screw-in brackets state the same limits, so measure the base first:
Tellegloww's white bracket and Boldever's stainless-steel one both work within those limits. Boldever adds an anti-slip pad against vibration. Both supply plastic anchors for concrete and brick and steel nails for wood; the anchors are not meant for wood.
Other designs suit other walls:
Mounting on a wall and swivelling the head up aims the picture across the ceiling. Choose ceiling mode in the projection menu so the picture reads the right way round.
Most HY300s weigh under 1 lb and fit in a backpack beside the snacks. The lens and swivel stand still need protection from bumps, crumbs and damp grass.
Measure the projector first. ClokoWe states 3.73 x 3.73 x 6.17 inches for its Pro+, and Amz Camel 3.7 x 3.7 x 6.9 inches for its HY300 Plus. Magcubic's HY300F football is a different shape, a 6.5 x 5.5 x 6.8-inch sphere, and needs a roomier case.
A hard shell is the pick for car boots and checked luggage. The Aurzen bag suits a backpack better, because its round shape follows the barrel body instead of adding corners.
Small extras help at the campsite. LEFXMOPHY's silicone remote skin glows in the dark after charging under light, so the remote turns up in a dark tent. A white sheet and a tripod complete the kit.
| Accessory | Stated fit | Key size or limit | How it attaches |
|---|---|---|---|
| Magcubic 47-inch tripod | Magcubic HY300 family; mini projectors | 19–47 in tall, 11 lb load | 1/4-inch screw, ball head |
| Universal floor tripod | HY300 Pro, HY320 Mini | 33–50, 43–110 or 60–160 cm | Adjustable bracket |
| Tellegloww mount | HY300, HY300 Pro | Base 0.24–0.35 in thick, under 4.7 in wide, up to 1,200 g | Three screws |
| Boldever mount | HY300, HY300 Pro, barrel projectors | Same base limits, up to 1.2 kg | Screws, anti-slip pad |
| Chanvoo drill-free mount | HY300, HY300 Pro | Aluminium, 180° swivel | 3M VHB tape or M4 x 25 screws |
| Yunquehe ball-head mount | HY300, Pro, Plus, Mini | Up to 5 kg | 1/4-inch screw, four holes |
| Grapsa hard case | HY300 Pro+, Pro, Ultra | Inner 9.7 x 5.7 x 3.5 in | Zip, divider, mesh pocket |
| FBLFOBELI hard case | HY300 Pro, Pro+, ClokoWe | 8.5 x 5.5 x 5.1 in | Double zip, EVA shell |
| Aurzen carry bag | Barrel-style HY300 Pro and similar | 11.22 x 5.24 in cylinder | Buckle handle, clips to a backpack |
| Magcubic Pro adapter | HY300 Pro, Pro+, HY300X, Max, HY300F | 1 m (3.28 ft) cord, 100–240 V input | Plugs into the projector |
| Magcubic Ultra adapter | HY300 Ultra, HY310, HY310X, HY320F, HY320 Pro | 1 m (3.28 ft) cord, 100–240 V input | Plugs into the projector |
Fit and limits as each maker states them. HY300 is a shared model name, so measure the projector's base and body before ordering a mount or a case.
A lost adapter or remote ends movie night faster than any other fault. Both look universal, and neither is.
Magcubic makes two adapters, and they are not interchangeable:
Both have a 1 m (3.28 ft) cord and accept 100–240 V, so they work on travel voltages with a plug adapter. For other brands, match the output voltage and the plug printed on the original.
Remotes need the same care:
Until the new remote arrives, a phone app or a USB mouse takes over; the HY300 remote guide walks through pairing a new remote and getting by without one, and the remote app guide covers phone control.
The best screen for an HY300 projector is a plain one. With a modest light source, the surface should give back as much light as it can, evenly, without tricks.
What to look for:
Avoid grey and ambient-light-rejecting screens. They help bright projectors in lit rooms, but on a 200-lumen engine they mostly make the picture darker. Short-throw ALR screens are also designed for projectors sitting close below them at a steep angle, which is not how an HY300 on a shelf works.
Many owners never buy a screen. A smooth, matte white wall does most of what a screen does, and a tight white sheet works for backyard nights. A screen earns its place when the wall is textured, coloured or broken up by switches and frames.
Settings that squeeze more light onto any surface are in the HY300 brightness guide, and prices for every add-on sit in the HY300 price guide.
A floor tripod with a standard 1/4-inch screw, such as Magcubic's 47-inch model, lifts the lens above seated heads. Magcubic bundles it with its own HY300 models.
Screw-in brackets from Tellegloww and Boldever fit the HY300 and HY300 Pro if the base is 0.24–0.35 in thick, under 4.7 in wide and the projector weighs up to 1.2 kg.
Magcubic's Pro-family adapter fits the Pro, Pro+, HY300X, Max and HY300F. The Ultra-family adapter fits the Ultra, HY310 and HY320 models.
Yes. Chanvoo's aluminium mount uses 3M VHB tape; give it 24 hours before hanging the projector, and use screws above a bed.
A matte white 16:9 screen with a gain near 1.0, at 80–100 inches. Grey and light-rejecting screens make a 200-lumen picture darker.