A white plastic bracket shaped to the base of the HY300 Pro, screwed to a wall or ceiling, that leaves the projector free to swing through its full 180°.
Many wall brackets clamp a projector in one fixed pose. Tjfujie shaped this one to the bottom of the HY300 Pro, so the projector's own 180° stand keeps working once it is on the wall. Point it across the room for a film, then tip it to the ceiling for a lie-down screening, without unscrewing anything.
What Tjfujie builds into the bracket:
The finish is white, which blends into most painted walls and ceilings and matches the white HY300 Pro bodies from Magcubic, Alwtniet and others. A black projector will stand out against it, a small point if the bracket hangs in plain view above a sofa.
Plastic has a real advantage here beyond looks. It is kind to the projector's finish, it will not rust in a steamy bathroom-adjacent bedroom, and it barely adds any load to the wall. What it asks in return is a careful fixing into the wall behind it.
| Spec | Value |
|---|---|
| Product | Wall and ceiling bracket for mini projectors |
| Brand | Tjfujie |
| Model number | HY300 Pro |
| Fits | HY300 Pro mini projector |
| Material | Special plastic, moulded rather than 3D printed |
| Surface | Resists scratches better than iron brackets, per Tjfujie |
| Colour | White |
| Mounting | Wall or ceiling |
| Rotation | Projector keeps its full 180° swivel when mounted |
| Fixing | Screws |
| Included | Bracket and screws |
| Instructions | Installation steps and installation videos |
| Weight | Lightweight |
| Unit count | 1 |
| Warranty | 1 year |
Where you hang the bracket decides what the evening looks like. Because the HY300 Pro keeps swinging on its stand, one position can serve both a wall picture and a ceiling picture. The trick is choosing a spot that leaves a clear, flat surface in front of the lens.
| Bracket position | Aim | Result |
|---|---|---|
| Wall above the headboard | Tilted up | A ceiling film straight over the pillows |
| Back wall of a bedroom | Level | A wall picture over the foot of the bed |
| Ceiling, centre of the room | Down and forward | A picture on the facing wall above furniture |
| High on a lounge wall | Level across the room | A big picture clear of sofa backs |
| Above a cot or playroom mat | Toward a wall | Cartoons well above little fingers |
Distance still sets the size. With the usual HY300 lens ratio near 0.9:1, 1.6 m from wall or ceiling gives roughly an 80-inch picture, and 2 m gives about 100 inches. The screen size guide works out other distances.
Before you mark the holes, think through:
The keystone and focus guide explains squaring a picture on a ceiling.
Tjfujie supplies the bracket, the matching screws and step-by-step installation help. What it does not know is your wall, and the wall decides how the screws should go in. A few minutes of checking beats a projector on the floor mid-film.
Keep a few safety habits in mind:
Tjfujie describes the bracket as very easy to install and backs it with installation videos, which help most on the step of lining the cradle up with the projector's base. If the projector ever feels loose, re-tighten the screws before the next film, and give them a check every few months on a ceiling mount.
For renters or anyone who cannot drill, the accessories guide covers drill-free adhesive mounts and floor tripods.
The Tjfujie is one of several brackets for the HY300 Pro, and the others take different routes on material and fixing. The right one depends on your wall, whether you can drill, and whether you want the projector's swivel kept free.
| Tjfujie | Chanvoo drill-free | Tellegloww | Boldever | |
|---|---|---|---|---|
| Material | Moulded plastic | Aluminium alloy | Iron and plastic | Stainless steel |
| Fixing | Screws | 3M VHB tape or M4 screws | Screws, nails, anchors | Screws, nails, anchors |
| Weight limit | Not stated | Not stated | 1200 g | 1.2 kg |
| Colour | White | Black | White | White |
Chanvoo's aluminium mount is the renter's choice: its 3M VHB tape holds without drilling after a 24-hour cure, and it keeps a 180° swivel. Tellegloww and Boldever publish base limits for other projectors, a base 0.6 to 0.9 cm thick and under 12 cm across, useful if your model is not an HY300 Pro.
Metal brackets win on stated load and on walls where a thin fixing has to carry the weight. The Tjfujie wins on fit: a cradle moulded to the HY300 Pro base holds the body in its intended position, where a flat universal plate relies on padding and a firm fixing. For a Pro that swings between wall and ceiling every night, that snug seat is what keeps the picture from creeping out of line. Whichever you choose, fixings matched to the wall matter more than the bracket material.
Pick the Tjfujie when:
For every mount, tripod and case in one place, read the HY300 accessories guide, or see the Chanvoo drill-free mount in full.
Tjfujie names the HY300 Pro only. Pro+ models stand on a speaker base that may not match the cradle, so compare the base before ordering.
Yes. Tjfujie says mounting does not affect the projector's 180° rotation.
No. Tjfujie makes it from moulded special plastic and contrasts it with 3D-printed brackets.
The bracket and matching screws. Add wall plugs or plasterboard fixings to suit your wall.
Yes. Tjfujie describes it for wall and ceiling mounting.