A soft silicone sleeve for the small infrared remote that comes with most HY300 and HY300 Pro projectors, in a pink that glows after the lights go out.
Every movie night has the same small crisis. The film is paused for snacks, the lights are off, and the remote has vanished between two cushions. LEFXMOPHY's answer is a pink silicone sleeve that glows in the dark, so the remote shows up where it fell.
The glow works like the stars children stick on bedroom ceilings. A luminous pigment in the silicone soaks up light while the lamps are on, then gives it back slowly once the room goes dark. LEFXMOPHY notes that the longer the skin sits under light, the brighter it glows.
That shapes a simple routine:
Apart from the glow, the skin does the plain jobs of any remote case. Soft rubber grips a sofa arm instead of skating off it, cushions the plastic shell when the remote hits a hard floor, and keeps the buttons free of dust and crumbs. LEFXMOPHY lists protection from slipping, cracking, scratching and dust, and the whole sleeve washes clean when popcorn butter finds it.
The skin adds almost nothing in weight or bulk, so the remote still fits a hand and a pocket the way it did before.
| Spec | Value |
|---|---|
| Product | Silicone skin for mini projector remotes |
| Brand | LEFXMOPHY |
| Material | Soft, lightweight rubber silicone |
| Colour | Glow Pink |
| Glow | Luminous in the dark after light exposure |
| Charging | Longer exposure to light gives a brighter glow |
| HY300 remotes named | Magcubic HY300 and HY300 Pro, Alwtniet HY300 Pro, ClokoWe HY300 Pro+, Thunrlge HY300 Pro, ENUOSUMA HY300 Pro |
| More HY300 names | SKUOU HY300 Plus, Salange, HIPPUS, Aubor and Xgody HY300 Pro, Amovfilm |
| Other projectors named | YGSKK 1000, AKIYO O1 Pro, Yoton Y3, Sainyer Q100, HOTPEAK PR06, Nonete NT30, Maypug P1 Mini, Tecaki X10ATV |
| Buttons and ports | Full access through precise cut-outs |
| Protection | Against slips, cracks, scratches and dust |
| Care | Washable |
| Pack | 1 skin |
| Remote | Not included: skin only |
The skin is shaped for one remote design, not for every projector that carries the HY300 name. Many HY300 and HY300 Pro makers ship the same slim infrared remote, which is why one sleeve covers a long list of brands. The trick is confirming that your remote is that one.
LEFXMOPHY names these HY300-family projectors:
| Projector | Named in the fit list |
|---|---|
| Magcubic HY300 and HY300 Pro | Yes |
| Alwtniet HY300 Pro | Yes |
| ClokoWe HY300 Pro+ | Yes |
| Thunrlge HY300 Pro, ENUOSUMA HY300 Pro | Yes |
| SKUOU HY300 Plus, Salange HY300 Pro | Yes |
| HIPPUS, Aubor and Xgody HY300 Pro, Amovfilm | Yes |
| Magcubic HY300 Pro+ with voice air-mouse remote | Not named |
Beyond the HY300, it names the YGSKK 1000, AKIYO O1 Pro, Yoton Y3, Sainyer Q100, WEMI X1BQ, AuKing M8-F, HOTPEAK PR06, Nonete NT30, Maypug P1 Mini and Tecaki X10ATV.
How to check your remote before ordering:
The HY300 remote guide shows the difference between infrared and voice remotes in more detail.
Why so many brands on one list? Much of the HY300 range is built from shared parts, and the remote is one of the most widely shared. Two projectors with different badges can arrive with identical remotes in the box, which is also why one replacement remote often works across several makers. Still, a projector from a named brand that shipped a different remote in a later batch will not suit the sleeve, so the remote in your hand is the final word.
Fitting a silicone skin takes a minute, and doing it in the right order avoids stretching the rubber. LEFXMOPHY cuts the sleeve precisely so every button, port and function stays reachable once it is on.
The infrared window is the one part that must stay uncovered. Infrared remotes talk to the projector by light, so a sleeve pulled crooked over that small lens weakens or blocks the signal. If the remote stops answering after fitting the skin, re-seat the sleeve before blaming the batteries.
Care is simple:
A skin does not fix a remote that has failed. When buttons stop working even with fresh batteries, the HY300 fixes page covers the checks, and the remote app guide keeps the film running from a phone meanwhile.
A glowing skin makes the remote easier to find and harder to break. It cannot replace a remote that has gone missing for good or stopped working. For that, a spare remote does the job, and for HY300 owners the two often make a sensible pair.
Three remotes that pair well with, or stand in for, this skin:
| Problem | Skin | Spare remote |
|---|---|---|
| Remote lost in the dark | Glows, easy to spot | Keeps the film going |
| Dropped on tiles | Cushions the fall | Backup if it breaks |
| Remote gone for good | No help | Solves it |
| Dust and sticky fingers | Washable cover | No help |
Before buying either, check the brand name on the projector's base against the fit list, since both skins and replacement remotes are made for particular remote designs. A spare infrared remote paired with a glowing skin on the main one is a tidy setup for a busy household: one lives by the sofa, the other in the bedside drawer for ceiling films. The accessories guide covers mounts, cases and adapters alongside remotes.
Yes. LEFXMOPHY names Magcubic's HY300 and HY300 Pro among the remotes it fits.
LEFXMOPHY does not give a time. The glow is brighter the longer the skin sits under light, and fades gradually in the dark.
It is not made for that shape. Air-mouse remotes on some Pro+ and Ultra models are thicker and are not in the fit list.
Yes. The cut-outs give access to every button, port and function, including the battery door.
No. It is a silicone skin for the remote you already own.