Moxweyeni's small steel mount screws to a wall or ceiling, cushions the HY300 Pro on an EVA pad and swivels through 180° after fitting, so the picture can move from wall to ceiling without new holes.
Moxweyeni builds its mount from electrophoresis alloy steel and finishes it in powder coat. That double treatment is the same kind used on garden furniture and bike frames, and it keeps rust away for years. Where the projector sits, a soft EVA pad protects the finish from scratches.
The mount is heavier than it looks. At 13.92 oz, it outweighs many plastic and aluminium brackets several times over, and that weight goes into a thick plate that stays flat under load. An HY300 weighing less than a pound barely troubles it.
Four features define it:
The mount is black in its specifications, and the maker notes that shades can look slightly different in person. On a dark accent wall or a charcoal ceiling it blends in, where a white plate would stand out as a bright square.
| Spec | Value |
|---|---|
| Brand | Moxweyeni |
| Model | DD2476 (part DD-Moxweyeni-2476) |
| Type | Adjustable wall and ceiling mount |
| Material | Electrophoresis alloy steel |
| Finish | Powder coated, rust and corrosion resistant |
| Projector pad | EVA, against scratches |
| Adjustment | 180° swivel after installation |
| Plate size | About 4 × 4 × 0.6 in (10 × 10 × 1.5 cm) |
| Overall dimensions | 4.13 × 3.86 × 2.05 in |
| Weight | 13.92 oz |
| Colour | Black |
| Fixing | Expansion screws through pre-drilled holes |
| Mounting surfaces | Walls, ceilings and other flat surfaces |
| Compatible | HY300 and HY300 Pro portable mini projectors |
| In the box | One mount with screw accessories |
In a small room, every flat surface has a job. The nightstand holds a lamp and a phone, and the desk holds a laptop. Moving the HY300 onto a 10 cm plate on the wall hands both surfaces back.
Moxweyeni suggests the mount for bedrooms, living rooms, offices and other small spaces. Each suits a different placement:
The mount also helps keep cables tidy. With the projector fixed in one spot, the power lead can run down the wall in a straight line, clipped in place or hidden in a slim trunking channel, rather than snaking across a desk.
Plan the picture size before choosing the spot. A 0.9:1 throw ratio, the figure Magcubic gives its Pro+, turns 2 m of distance into roughly a 100-inch picture. In a small room, a plate on the far wall, not the nearest one, makes the most of the space.
The HY300 screen size guide turns distance into picture size for every common wall.
The mount comes with pre-drilled holes and its screw accessories, so the plate doubles as a template. Hold it in place, mark through the holes, drill and fix. The flat-plate design keeps the job simple on a wall or a ceiling.
With the plate on a ceiling, the projector hangs upside down. Open the projection settings and choose the ceiling or flip mode so the film is the right way up.
Before the final screw, check two practical points:
The HY300 manual guide explains the ceiling and rear projection modes, and the keystone guide squares a picture thrown at an angle.
HY300 wall mounts share a job but not a look. Moxweyeni's black powder-coated steel is the choice for dark walls and for owners who want the heaviest plate. White or round alternatives suit brighter rooms.
| Mount | Finish | Size | Fixing |
|---|---|---|---|
| Moxweyeni | Black powder-coated steel, EVA pad | About 10 × 10 × 1.5 cm | Expansion screws |
| Boldever | White stainless steel, anti-slip pad | 4.72 × 4.72 × 0.35 in | Nails and anchors |
| Tjweiqing | Round laser-cut iron | Round plate | Screws bought separately |
| Tjfujie | White special plastic | Not stated | Screws included |
| Yunquehe | Iron, metal ball joint | Thickened base | Four screws and anchors |
Boldever is the white counterpart, with the same screw-in idea and nails as well as anchors. Tjweiqing offers a round outline. Yunquehe goes a different way altogether, with a ball joint that turns 360° and a 1/4-inch screw into the projector.
Tjfujie's plastic bracket is the lightweight option for the HY300 Pro, less likely to scratch than bare iron but without the weight of steel. Chanvoo's aluminium bracket remains the one to pick when drilling is not allowed, since it can go up with tape.
Choose Moxweyeni when:
Check before ordering:
All the stands and brackets appear together in the HY300 accessories guide.
Yes. It is made for the HY300 and HY300 Pro portable mini projectors.
The mount swivels through 180° after installation, so you can move the picture between wall and ceiling without new holes.
Electrophoresis alloy steel with a powder-coated finish that resists rust, plus an EVA pad where the projector sits.
Yes. The mount comes with expansion screws and pre-drilled holes for wall or ceiling fixing.