Tonight's picks
HY300 · 3.5 mm audio out · Wi-Fi 6

ear&ear HY300

A plain HY300 with one handy extra: a 3.5 mm audio jack beside HDMI and USB, so wired headphones or a pair of desk speakers plug straight in, next to dual-band Wi-Fi 6 and Android 11.

  • SystemAndroid 11, Mali-G31 GPU
  • Light160 ANSI lumens, 1500:1 contrast
  • PortsHDMI, USB, 3.5 mm audio out
  • WirelessWi-Fi 6 dual-band, Bluetooth 5.0
  • Picture size35–130 in
  • NoiseUnder 25 dB
Perfect for
  • Wired headphones or powered speakers with no Bluetooth delay
  • A console or TV stick on HDMI in a dark bedroom
  • Quiet late films, with a fan under 25 dB
  • Streaming over 5 GHz Wi-Fi 6
Look past it if
  • Rooms with any daylight: 160 ANSI is the dimmest here
  • You want focus that sets itself
  • You want Android 14 and the newest app versions
Start the show

A 3.5 mm jack on the ear&ear HY300: wired headphones and speakers

Most HY300 projectors send sound out one way only: Bluetooth. The ear&ear HY300 adds a 3.5 mm audio jack beside its HDMI and USB ports. Wired headphones, a pair of powered desk speakers or an old hi-fi amplifier plug straight in, with no pairing and no delay.

Why a humble jack matters on movie night:

  • No lip-sync drift. Bluetooth audio always trails the picture by a fraction of a second; a cable does not.
  • Speakers you already own. Powered PC speakers or a small amplifier become the projector's sound system.
  • Headphones for late films. Any wired pair works, even the ones in the kitchen drawer.
  • Games. Wired sound keeps the bang in step with the flash.

Bluetooth 5.0 is still there for wireless headphones and speakers, and the built-in 360° speaker covers a small bedroom on its own. The jack is the extra that makes the ear&ear the easy choice for anyone whose sound system has a plug rather than a pairing button.

Mind the volume. Start low when wired headphones go in, then turn it up. A level chosen for the built-in speaker can be a shock through earbuds.

The rest of the ear&ear is standard HY300. A native 1280 × 720 panel with an LED light source accepts signals up to 4096 × 2160 and shows them at 720p. Android 11 carries Prime Video and YouTube built in, with a Mali-G31 GPU running the interface and dual-band Wi-Fi 6 bringing the stream in on 2.4 or 5 GHz.

More ways to get sound out, and fixes for silent Bluetooth, are on the HY300 troubleshooting page.

Tech sheet

Lens, light and ports

SpecValue
Modelear&ear HY300 (HY300-A-WT)
SystemAndroid 11
GraphicsMali-G31 GPU
AppsPrime Video and YouTube built in
DisplayLED light, native 1280 × 720
Maximum input4096 × 2160; 1080p supported
Brightness160 ANSI lumens
Contrast1500:1
Picture size35–130 in
FocusManual
KeystoneAutomatic
Rotation180°
Wi-FiWi-Fi 6, dual-band 2.4 / 5 GHz
Bluetooth5.0
PortsHDMI, USB, 3.5 mm audio out
Video decodingH.264, H.265
SoundBuilt-in 360° speaker
NoiseUnder 25 dB
In the boxProjector, power cord, remote, user manual
Warranty12 months

160 ANSI in a dark bedroom: what the ear&ear HY300 shows well

The ear&ear HY300 is rated at 160 ANSI lumens with a 1500:1 contrast ratio. That sits a step under the typical HY300 Pro rating, and it decides where the projector belongs. In a blacked-out bedroom it makes a happy screen; with a lamp on, the picture fades fast.

EveningPicture that worksWhat helps
Film on the bedroom ceiling60–80 inLights off, a pale ceiling
Cartoons on a child's wall50–70 inBlinds down, a white wall
Series from bed on the wall70–90 inCurtains closed, no hallway light
Garden film50–70 inAfter full dark, on a white sheet

ear&ear quotes a 35 to 130-inch range. At 160 lumens, the top end is for a completely black room; the sizes above hold their colour better. Shrinking the picture is the cheapest way to make it brighter, because the light gathers on a smaller area.

For the ceiling, set the projector close to the headboard so the picture lands above your face rather than behind your head.

  • Choose the wall. Matte white beats any colour; a cream or grey wall eats light.
  • Kill stray light. A hallway lamp through an open door lightens the blacks more than you expect.
  • Pick a bright picture mode. Modes named standard or vivid usually put more light on the wall than cinema-style ones.

The HY300 brightness settings go through every mode, and the HY300 screen size chart pairs each size with a distance. Auto keystone fixes the tilt, and the manual focus wheel does the rest.

On the HY300 shelf

Where it plays in the range

HY300 projector models by type, September 2026. Highlighted: ear&ear HY300.

Plugging a console or TV stick into the ear&ear HY300

Three ports sit on the ear&ear: HDMI, USB and the 3.5 mm audio jack. Between them, they turn a small projector into a bedroom games screen or a stick-powered TV. The steps are the same for each device.

  1. Connect the console, TV stick or laptop to HDMI; a stick also takes power from its own adapter or a USB port where it fits.
  2. Switch the projector over to its HDMI input.
  3. Set the console's video output to 1080p or 720p, since the panel shows 720p whatever arrives.
  4. Plug speakers or headphones into the 3.5 mm jack, or pair them over Bluetooth 5.0.
  5. Turn the focus wheel until on-screen text is sharp at the edges.

USB covers the rest. A flash drive or portable hard drive full of films plugs straight in, and H.264 and H.265 files play without a computer. That makes the ear&ear handy for a cabin or a caravan where Wi-Fi is weak.

Pack an HDMI cable of a metre or two. A short lead lets the console sit beside the projector on the nightstand instead of dangling off the edge.

  • Consoles. Fine for party and adventure games; twitchy online shooters are better on a monitor.
  • TV sticks. Add services missing from the built-in apps.
  • Laptops. Photos, slides and browser video on the big wall.
  • Phones. Cast over Wi-Fi 6 or use a USB-C to HDMI adapter; the phone connection guide covers both.
Quiet enough for a sleeping house. ear&ear rates the fan under 25 dB. Late gaming or a film after midnight stays between you and the headphones.
Also showing

Three other projectors

1 ear&ear HY300 Pro
Brighter, same ports ear&ear HY300 Pro
ear&ear's HY300 Pro raises brightness to 200 ANSI with Wi-Fi 6 and HDMI, USB and audio ports.
  • HY300 Pro · Android 11
  • Wi-Fi 6 + Bluetooth 5.0
  • Manual focus, auto keystone
Start the show
2 Magcubic HY300 (original)
Magcubic's first HY300 Magcubic HY300 (original)
The original Magcubic HY300 pairs 200 ANSI with a 5W stereo speaker and Bluetooth 5.4.
  • HY300
  • Wi-Fi + Bluetooth 5.4
  • Manual focus, auto keystone
Start the show
3 Magcubic HY300 Pro (2026)
Smaller and brighter Magcubic HY300 Pro (2026)
Magcubic's 2026 HY300 Pro is 30% smaller than the earlier Pro and rated at 200 ANSI lumens.
  • HY300 Pro
  • Wi-Fi + Bluetooth
  • Manual focus, auto keystone
Start the show

ear&ear HY300 or an HY300 Pro: where the plain model fits

The ear&ear carries the plain HY300 name, yet it has dual-band Wi-Fi 6 and an audio jack many Pro bodies lack. Where it gives ground is brightness and software age. Put side by side, the choice is clear enough.

ModelLightSystemSound out
ear&ear HY300160 ANSIAndroid 113.5 mm jack
ear&ear HY300 Pro200 ANSIAndroid, Mali-G31Audio port
Magcubic HY300 (original)200 ANSIApps built inBluetooth 5.4
Magcubic HY300 Pro (2026)200 ANSIApps built inBluetooth

Pick the ear&ear HY300 when wired sound matters and the room goes fully dark. Step up to ear&ear's own HY300 Pro for 200 ANSI with the same set of ports. Choose a Magcubic when a brighter picture counts for more than a cable.

Shape and swivel match any HY300: 180° from wall to ceiling, automatic keystone and a focus wheel. The differences live in the ports and the light, not the body.

In a child's room, the lower brightness matters less than it sounds. Cartoons at 60 inches on a pale wall, lights off, look bright and cheerful, and the quiet fan keeps nobody awake.

A few things to confirm before ordering:

  • Bluetooth 5.0. Older than the 5.4 on newer bodies, though fine for headphones; the jack sidesteps it entirely.
  • Brightness. 160 ANSI rules out rooms that never get fully dark.
  • Warranty. Twelve months from ear&ear.
  • Remote. Keep the original safe; the HY300 remote guide explains how to find a replacement that matches your layout.

What separates a plain HY300 from a Pro in general is covered in HY300 vs HY300 Pro.

Before the lights go down

Setup and screen questions

Does the ear&ear HY300 have a headphone jack?

Yes. A 3.5 mm audio output sits beside HDMI and USB, for wired headphones or powered speakers.

How bright is the ear&ear HY300?

160 ANSI lumens with a 1500:1 contrast ratio, so it suits dark bedrooms rather than lit living rooms.

Which Android version does the ear&ear HY300 run?

Android 11, with Prime Video and YouTube built in and a Mali-G31 GPU.

Is the ear&ear HY300 quiet?

ear&ear rates its fan under 25 dB, quiet enough for late films in a bedroom.

Does the ear&ear HY300 have Wi-Fi 6?

Yes. It connects on both 2.4 and 5 GHz, and Bluetooth is version 5.0.